Category: Fan Art

  • Merry Christmas from EnderWiggin.net!

    Merry Christmas from EnderWiggin.net!

    It’s early Christmas Eve where I am so before I got busy I wanted to wish all my fellow Launchies a very Merry Christmas!

    2013-Christmas
    This is the holiday card I sent out to cast and crew of Ender’s Game and I’m posting it here to send you guys the same holiday wishes. Inside, it says:

    Ender Wiggin is asked to fill in for Santa.

    “Keep calm, shoot straight. In 3… 2… 1…”

    Thanks to my friend Virginia for doing this piece for me! Merry Christmas, Launchies!

     

  • MIT Students Celebrate Ender’s Game Movie Release

    MIT Students Celebrate Ender’s Game Movie Release

    mit1

    Looks like some students at the Massachusetts Institute of Technology are major fans of Ender’s Game and decided to celebrate the advent of the movie by transforming MIT into Battle School. Those banners are awesome, even though I do wonder why they chose Griffin and Leopard over Salamander and/or Rat, and it seems they found enough dummies to demonstrate that, indeed, the enemy’s gate is down.

    mit2
     
    mit3
     
    mit4
     
    Check out MIT student Hairuo G.’s pics on the MIT Admissions Blog and Slice of MIT, the Institute’s Alumni page.

     
    Sources: MIT Admissions Blog, Slice of MIT

  • 2013 Ender’s Game Pumpkin Carving Contest Results

    2013 Ender’s Game Pumpkin Carving Contest Results

    11 entries came in for our Ender’s Game Pumpkin Carving contest and after looking through and examining each pumpkin, here are the results!

    In First Place, winning the Grand Prize packet, is this Ender’s Game poster pumpkin by Emma! Amazing job, Emma!

    2013-Pumpkin01
    In second place is this Dragon Army/Ender’s Game logo pumpkin by Dustin. Nice job! I can feel the pain of that logo carving. 🙂

    2013-Pumpkin02
    In Third Place, we have this Salamander Army logo pumpkin by Andrew. Bonzo would be proud!

    2013-Pumpkin03

     

     

    And finally, we have this Griffin Army logo pumpkin by Natalie. I’d have ranked this higher, but sadly I had to penalize for lack of a lit in the dark photo.

    2013-Pumpkin04

     

    Thanks to everyone who participated! I will be in touch soon!

    In closing, here’s the full image of my own Ender’s Game pumpkin, which I never did post because I was too busy…

    Ender-Pumpkins

     

     

  • Countdown to NovEnder Day 3: Bean T-Shirt

    Countdown to NovEnder Day 3: Bean T-Shirt

    NovEnder3

    It’s Day 3 of the Countdown to NovEnder and we’ve got only 29 days to go! For today’s giveaway, we’re giving away a new t-shirt from our CafePress store. Since today is Aramis Knight’s birthday, we felt it was appropriate to make a BEAN shirt.

    Bean-Shirt2

    This giveaway is open to the US only. Kids and women’s shirts are also available for the winner.

    How to Enter

    Each day, check the Rafflecopter widget for the various ways you can enter and make sure you are eligible. After you complete each task, you must log in your entry in the widget or it will not count. We’ve put in a wide variety of methods for you to enter and for some you can enter once every day of the giveaway.

    You MUST leave an email address that you check frequently so that you can claim your prize within 72 hours. Please DO NOT comment with your email address in your comment.

    For today’s giveaway, simply head over to this post and wish Aramis Knight a Happy Birthday.

    a Rafflecopter giveaway

  • Ender’s Game Toon Leader T-Shirt

    Ender’s Game Toon Leader T-Shirt

    Those of you that love t-shirts might be interested in this unofficial Toon Leader t-shirt from Sun Frog Shirts:

    Toon-Leader-TShirtThe shirt sells for $19, not including shipping. Buy it here.

     

  • Khylin Rhambo as Dink Meeker

    Khylin Rhambo as Dink Meeker

    I’m sure I speak for most of you that when those leaked character posters came out, we all just kind of reacted like this:

    Now we can react like that to this one of Khylin Rhambo as Dink Meeker, which is unofficial, but still amazing for the fun/cool factor.

    Dink-Meeker

    Khylin posted this to his Instagram today with credit to Ricky Middlesworth. Looks so legit, though I wish some names were on it!

  • Fan-Made Friday: Ender Wiggin by ~Jdbag75

    Fan-Made Friday: Ender Wiggin by ~Jdbag75

    It’s Friday, so here’s a bit of fan art for you guys to start your weekend. We’re now 69 days from Novender 1st!

    This one was done by ~Jdbag75 on Deviantart and depicts Ender in the Battle Room firing his flash gun.

    Ender-Jdbag75

  • VIDEO: Ender’s Game Cupcake “Tour”

    VIDEO: Ender’s Game Cupcake “Tour”

    Earlier this week I posted images of the Ender’s Game Battle School cupcakes I made over the weekend and now I’ve got a video to give you guys a little “tour” of the cupcake wrappers, which really don’t show too well when you’re taking photos.

  • Ender’s Game Battle School Cupcakes

    Ender’s Game Battle School Cupcakes

    Ender-Cupcakes6

    Happy Monday, Launchies! This past weekend I got motivated to do some Ender’s Game cupcakes. The army logos are great for doing fan artsy stuff and since I do a lot of these kinds of cupcake things for my other blog Fictional Food, it was really only a matter of time until I tried to tackle these.

    And for those of you wondering where Leopard and Centipede is, just go look at those logos and tell me if you think it’s humanly possible to cut those things out of fondant. 😉

    To make the logos, I rolled black fondant really thin and then let it dry for a bit to make it easier to cut. I’d printed out the logos on paper and cut them out first. For Phoenix and Griffin, I used a photo from the Ender’s Game Experience I found online, since my good photos of the logos got eaten on my corrupted SD card.

    Ender-Cupcakes1

    After that, I laid them over the frosting and started cutting with an X-Acto knife. Sadly, the paper got stuck to Phoenix and Salamander, which is why those don’t look too good.

    Ender-Cupcakes2

    Here are the logos all cut out and drying. The white stuff is powdered sugar to keep it from sticking to the bottom.

    Since I only had Halloween cupcake cups, they would have looked kind of dopey from the sides, so I made cupcake wrappers. I first did these kinds of wrappers for my Effie Trinket cupcakes and they worked really well for these too!

    Ender-Cupcakes3

    If you want to try wrapping your own cupcakes, I have the wrappers in PDF form for you to download. They may need a little trimming and you’ll also need to leave a little tab on one end to glue/tape together.

    Ender-Cupcakes4

    Here’s the side of the Dragon cupcake. I put book and movie quotes on the opposite sides of each of them.

    Ender-Cupcakes5

    I don’t think Graff likes me insinuating he’s a “rat” by putting him on the Rat Army cupcake…

    Ender-Cupcakes8

    Here’s the Salamander cupcake. It’s still got little bits of sugar on it and his poor tail fell off. It was too hard to separate the belly sections, so I just cut into the frosting and it turned out fine. To make this color I used green fondant mixed with gobs of yellow and orange color gel.

    Ender-Cupcakes10

    Griffin Army cupcake! The ear was hard to cut, but I like how it came out overall. I should have made it bigger though. This was just straight green, nice and easy.

    Ender-Cupcakes11

    As I mentioned earlier, the Phoenix got a little dinged up. I didn’t pat enough sugar onto it and the paper got stuck to the frosting. The color was made by mixing blue and green fondant.

    Ender-Cupcakes12

    Rat Army cupcake. I thought the whiskers and toes would be impossible, but they weren’t too bad. I just used basic red fondant for this. If you’re wondering why I have so many colors, it’s from making cakes like this Mario one for my son and this Hello Kitty one for my daughter. I just have a fully stocked fondant pantry!

    Ender-Cupcakes13

    Here’s Asp, which was pretty hard to cut. This is one of my favorite logos. Totally reminds me of the auryn from Neverending Story.

    Ender-Cupcakes9

    And finally, here’s the Dragon. Still my favorite design! Tonight I’ll take some more photos and then let my kids fight over which cupcake they get. This morning my son was giving me a hard time because I always freak out with them touching my stuff before I get to do photos and video. He was barely touching one with his pinky and taunting me, saying, “Ooohh look Mommy, look look! I’m touching the cupcake, oh no!!!”

    The kid needs some sitting on. This is on the agenda for tonight. I took video so you guys can see the wrappers better and will post that later this week.

    Here’s one last photo with the poster:

    Ender-Cupcakes7

    I could go into a number of dorky lines for these.

    “The enemy’s cake is down.”

    “We need cakes like yours, Ender.”

    “You will be the one to frost mankind.”

    I’m sure Graff would have gotten appropriately fat if I’d been supplying these to him at Battle School.

     

     

  • ‘Keep Calm and Shoot Straight’ Shirt

    ‘Keep Calm and Shoot Straight’ Shirt

    It’s Trailer Preview (haha!) day!

    To celebrate, we’ve added a new design to our EnderWiggin.net CafePress store: “Keep Calm and Shoot Straight”

    Keep Calm

     

    Here’s a tank for the ladies too:

    Keep-Calm-Tank

    We’ll add more through the day, but if you have a specific item you want added right away, let us know!

  • Fan Made Friday: Theme for ‘Ender’s Game’

    Fan Made Friday: Theme for ‘Ender’s Game’

    Ender's-Game-Theme-Cancer-Killing-Gemini

    Check out this cool fan-made rock song written for Ender’s Game by Cancer Killing Gemini.

    Lyrics:

    Turn me into your best violence machine
    Without concern for how it’s sure to damage me
    Your eyes wide as the third child learns to balance love and fear
    Learn to fly towards an endless tide wishing Valentine were here

    I don’t know who I’m supposed to be
    But I’m not allowed to fail
    If our future relies on me
    Then I’m not allowed to fail
    I don’t know who I’m supposed to be
    But I’m not allowed to fail
    If our future relies on me
    Then I can’t afford to fail

    Get more from hatred then I do from empathy
    No lasting friendship as you choose my enemies
    You stand by all the killing while a lack of mercy earns the crown
    Somehow I learn to love them while I put them in the ground

    No one else can help me
    I’ll learn to trust myself
    You think you can crush me?
    I’ll hold my ground
    What will it take to break me?
    I don’t even know myself
    But I know the enemy’s gate is down

    You can listen to more music by Cancer Killing Gemini here.

    Thanks to @bostonbloghead for the tweet that made me find it!

  • Dragon Shirts Added to EnderNet Cafepress Store

    Dragon Shirts Added to EnderNet Cafepress Store

    As some of you are aware, I’m hoping to show up at Comic Con wearing a Battle School uniform. Sure, I’m way past the ripe age of recruitment, but it’s all in fun and what better fun is there to have hanging out in that epic Ender’s Game Experience wearing a Battle School outfit?

    Part of the costume involves getting my hands on a bright orange t-shirt. And rather than just go down to Target to get one, I decided to get one from Cafepress. At first I was going to buy the THIRD shirt, but then thought it’d be funnier if I made a Dragon related one.

    Dragon

    If you’re not sure about the reference, it’s a modification of the jeering calls made when Dragon Army shows up late to battle. The army waiting inside began to call, “Your ass is draggin’! Your ass is Dragon!”

    The shirt is available in both Men’s and Women’s sizes.

  • ‘Third’ Merchandise Added to EnderNet CafePress Store

    ‘Third’ Merchandise Added to EnderNet CafePress Store

    Recently, I opened up a CafePress store for EnderWiggin.net and added a few designs, including some basic “Ender’s Game” ones and “The Enemy’s Gate is Down” ones with the EnderWiggin.net logo.

    I just added a few new products with a rather simple, but very Ender’s Game design.

    Third-Onesie

    Yup, a baby onesie with the word “Third” on it. Obviously this would only be relevant to parents having a third child and happen to be Ender’s Game fans, but I thought it was funny nonetheless. The onesie comes in black or in blue/gray/pink.

    There are also Third bibs, since baby Thirds have to eat.

    Third-bib

    And also Third hats, to help protect the precious minds that will eventually save our race.

    Third-Hat

    If you have a request for a design, feel free to let me know!

    Also, can you tell we’re desperate for news here? Sigh.